The CarTablet comes equipped with built-in speakers, but to achieve optimal sound quality, connecting it with your car speakers is recommended. Here's how you can do this using either an AUX cable, the CarTablet's built-in FM transmitter or Bluetooth so it works in every vehicle

Using Bluetooth (1 Minute Installation Time)

Using an AUX Cable (1 Minute Installation Time)

If your car is equipped with an AUX input, connecting your CarTablet for enhanced sound quality is a simple process. Follow these steps:

1. Locate the AUX input in your car, typically found on the dashboard or in the center console.
2. Use the AUX cable provided with your CarTablet.
3. Plug one end of the AUX cable into the AUX output port on your CarTablet.
4. Insert the other end of the AUX cable into the AUX input of your car.
5. On your car’s audio system, select the AUX option. The sound from your CarTablet should now be transmitted through your car’s speakers.
   
   

Using the Built-In FM Transmitter (2 Minutes Installation Time)

For cars without an AUX input or for those preferring a wireless connection, the CarTablet's built-in FM transmitter offers a convenient alternative. Here's how to set it up:

1. Turn on the CarTablet and navigate to the FM transmitter settings.
2. Select an FM frequency on the CarTablet that isn’t occupied by local radio stations to avoid interference.
3. Switch on your car's radio and tune it to the FM frequency you chose on the CarTablet.
4. With the CarTablet and car radio tuned to the same frequency, the audio from your CarTablet will be wirelessly transmitted and played through your car’s speakers. If the volume is still really low or if you hear noise through your music try to use a different FM frequency
   

By connecting your CarTablet to your car speakers, you'll significantly enhance the audio quality of your content, making for a more enjoyable listening experience while on the road.